Ag Fencing

Drill hole 13mm (1/2”) approximately 900mm (3 foot) from ground

Insert a STAYpoint
Recommended steel stays
- 2 inch extra light wall x 3m
- 1½ inch medium wall x 3m

Position STAYpoint in drilled hole.
(Or use another method to join strainer and stay)

Position stay in centre “U” of STAYBLOCK™. Loop wire around strainer and STAYBLOCK™ (Allow one turn for every two fence wires – maximum 3 turns)	Locate tension wire as pictured left (at the base of the neck area) Tension at centre with wire strainers while checking and adjusting wires. Tie off as preferred.

Position stay in centre “U” of STAYBLOCK™.
Loop wire around strainer and STAYBLOCK™ (Allow one turn for every two fence wires – maximum 3 turns)

Locate tension wire as pictured left (at the base of the neck area)

Tension at centre with wire strainers while checking and adjusting wires.

Tie off as preferred.

Notes:
The Extended Bull Wire Knot (pictured right) or a Spiral Fast is suggested for joining wires.
Optional :Lubricating wire at strainer post will make straining easier.

Fence-Line Solutions
Steel Stay & Steel Strainer Post