Fence-Line Solutions
    Timber Stays & Timber Strainer Posts
Home & Contact Product Info Purchase Products Features & Benefits
 

 

Mortice / attach 3 m stay to strainer post approximately 900mm (3 foot) from ground  

OR : If using pre-pointed pine posts trim point to 50mm (2”) diameter. Drill a 63 mm (2 1/2”  hole) in strainer post with spade bit, then position stay.

Position  stay in centre “V” of STAYBLOCK™.
Loop wire around strainer and STAYBLOCK™ (Allow one turn for every two fence wires – maximum 3 turns)

 

Optional : Use staple to hold wire in place, about 100mm (4”) above ground

 Locate tension wire as
pictured (at the base of the neck area)

Tension at centre with wire strainers while checking and adjusting wires.
Tie off as prefered.

Notes:
The Extended Bull Wire Knot (pictured right) or a Spiral Fast is suggested for joining wires.
Optional :Lubricating wire at strainer post will make straining easier.
Fence-Line Solutions  PO Box 301 Wandiligong Vic 3744 Australia    Fax 03 5755 1389