Drill hole 13mm (1/2”)  approximately 900mm (3 foot) up from ground

Insert a STAYpoint 
 Recommended steel stays
- 2 inch extra light wall x 3 m
- 1½ inch medium wall x 3 m
(a heavier wall can be used)

Position STAYpoint in drilled hole– use pressure washer (as pictured) at the timber post.
(Or use another method to
join strainer and stay)

Position stay in centre “U” of STAYBLOCK™.
Loop wire around strainer and STAYBLOCK™ (Allow one turn for every two fence wires – maximum 3 turns)

Locate tension wire as pictured left, at the base of the neck area.

Tension at centre with wire strainers while checking and adjusting wires. See right

Tie off as preferred.